Freescale-semiconductor Target Interface MMDS0508 Manual do Utilizador descarregar pdf (Página 20)

Connector Information

Power Supply Fuse Replacement

3–20

MMDS0508 Target Interface

• Pod B pin 17 is the external timetag input for the bus state analyzer. To use this

source, make the desired clock connection to the white probe tip, then use the

TIMETAG command to select an external time tag source for the analyzer.

3.5 Power Supply Fuse Replacement

The station module power switch/connector assembly contains a standard 1/4 x 1 1/4

inch, 1.6-ampere, 250-volt ceramic, time-delay fuse. Figure 3.2

shows this assembly

with its door open (for fuse replacement).

Figure 3.2 Power Switch/Connector Assembly

Figure 1. Power Switch/Connector Assembly

To replace the fuse, follow these steps:

1. Press the power switch OFF and disconnect the power cord.

Power Cord Socket

Fuse Door

Fuse

Power Switch

Tab

Freescale Semiconductor, Inc.

For More Information: www.freescale.com

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 85 86

Sem comentários

Freescale-semiconductor Target Interface MMDS0508 Manual do Utilizador Página 20